Beaded CD Ornaments

By Annabelle Keller

BeadedCD-Ornaments

Materials

  • Krylon Indoor/Outdoor Paint - Hunter Green (#53502)
  • Krylon Indoor/Outdoor Paint - Tomato (#53532)
  • Krylon Indoor/Outdoor Paint - Purple (#51913)
  • Krylon Glitter Spray - Glistening Gold (#401)
  • Krylon Glitter Spray - Shimmering Silver (#402)
  • 3 Compact Discs
  • 24 gauge Non-Tarnishing wire: (1) 2 yard length Gold and (2) 2 yard lengths Silver.
  • 10” length 1/8” wide Gold wire edge ribbon
  • (2) 10” lengths 1/8” wide Silver wire edge ribbon
  • 2/3 yard lengths 3/8” wide Gold wire edge ribbon
  • (2) 2/3 yard lengths 3/8” wide Silver wire edge ribbon
  • Assorted sizes and shapes of beads (silver, green, dark red, gold, blue & purple)
  • (3) 4” lengths cloth covered floral wire
  • (3) 8” lengths 20 gauge wire

General Supplies

  • Nail large enough to make a 1/8 inch diameter hole
  • Flat nose pliers
  • Cardboard boxes for spray booth and drying ornaments.
  • Dowel rod to fit across box for drying ornaments
  • Wire cutters
  • Ruler
  • Scissors

Instructions

  1. To make a hole for hanging, use flat nose pliers to heat nail and push through CD about 1/8 inch from edge. Cool.
  2. Twist one end of 20 gauge wire thru hanging hole and form hook on opposite end. This will serve as a handle while painting and drying.
  3. Following manufacturer’s instructions, paint each CD a different color: Hunter Green, Purple, Tomato. Hang ornaments on dowel rods across box to dry completely. Remove wire when dry.
  4. Adding beads: Refer to photograph. Anchor one end of the 24 gauge length of wire in the 1/8 inch hole. String beads in front of ornament only. Green and silver beads for green ornament; green, dark red and gold for red ornament; blue, purple and silver for purple ornament. Make 13 evenly spaced rows of beads around CD. Twist end of wire to back side of first wire. Trim excess wire.
  5. Hanger and bow: Tie hanger ribbon thru 1/8 inch hole. Tie 2 loop bow. Slip floral wire thru knot in bow on back side. Wire to ornament thru 1/8 inch hole. Twist bow tails around fingers to shape and trim as desired.