Quatrefoil Lamp

by Roxi Phillips

Jazz up a simple lamp with Spray Paint and a bit of masking.

3 hours plus drying time

Inspire your home décor by viewing more Home Décor spray paint projects from Krylon®.

Prepare lamp base by masking off all electrical elements with tape and paper.
Spray paint lamp base with Krylon® ColorMaster™ Primer: White; allow to dry. Remove all masking.
Spray paint lamp base with Krylon® ColorMaster™ Dover White.
With masking paper and tape, completely cover the outside of lamp shade.
Apply a thin coat of spray paint in a sweeping motion from side to side (Krylon® EZ Touch 360° Dial™ Spray Tip can be adjusted to spray vertically or horizontally – see back label instructions for more details)
Allow surface to dry for 30 seconds
Apply multiple thin coats of until surface is completely covered
Remove tape immediately after applying spray paint
Fusion dries in 15 minutes or less and can be handled in about 1 hour
Fusion must cure for a full 7 days to become fully chip and scratch resistant