Resin Chair

by Krylon®

Customizing resin chairs with Krylon® Fusion for Plastic® is a simple way to freshen or personalize your old chairs.

1 hour

Get inspired to personalize your home’s outdoor décor to fit your style by viewing more Outdoor spray paint projects from Krylon®.

Using ammonia-based cleaner, wipe down chair to remove any dust or particles (if the plastic is new, wipe down with paint thinner for best results)
Using painter’s tape, completely tape off any area that you do not want painted
Shake Krylon® Fusion for Plastic® can for two minutes or more
Applying in a well-ventilated area, hold can 8-10 inches from chair surface and spray in a sweeping motion from side to side (Krylon® EZ Touch 360° Dial™ Spray Tip can be adjusted to spray vertically or horizontally – see instructions on the back of label)
Apply a thin coat spray paint
Allow paint to dry for 30 seconds
Apply multiple thin coats until surface is completely covered
Remove tape immediately after applying paint
Krylon® Fusion for Plastic dries in 15 minutes or less, and can be handled in about one hour
Fusion must cure a full seven days to become fully chip and scratch resistant