Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
Use painter's tape to completely tape off any area that you do not want painted.
If paint or rust is flaking off the surface, use a wire brush or sandpaper to remove it. Wipe clean.
Applying in a well-ventilated area, hold the can of Krylon® Rust Protector™ Metallic Finish - Blue 6-8 inches from the tool cabinet surface and paint the exposed areas of top, sides and legs using a sweeping side-to-side motion with slight overlap.
Allow paint to dry for 30-60 seconds.
Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Krylon® Rust Protector™ Metallic Finish dries in 8 minutes or less, and can be handled in less than one hour.
Make sure the tool cabinet is completely dry before you remove the painter's tape from covered areas.
Get Inspired To Spray
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.