All paint should be used according to the manufacturer’s instructions.
Separate the bones of the plastic skeletons (some may come apart easily by hand; others may need to be cut apart using nippers or a small hack saw).
Attach the bones around the grapevine wreath using hot glue.
Spray the entire wreath lightly using Krylon® Fusion All-In-One® Metallic Satin Nickel, covering skeletons completely but leaving some of the underlying wreath color showing.
Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap.
Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 6 hours or after 24 hours.
Let the wreath completely dry.
Enjoy your spookily splendid bone wreath!
Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.