Antique Nightstand Project | Krylon® Spray Paint

Krylon Supplies You'll Need

Classic White
Anvil Gray

All paint should be used according to the manufacturer’s instructions.

Other Supplies You'll Need

Minwax® Oil Based Pre-Stain Wood Conditioner
Minwax® Oil Based Wood Finish™
Classic Gray
Minwax® Polycrylic™ Protective Finish Matte
Drop cloth or tarp
Bare / stripped wood nightstand
220 grit sandpaper
Fine grit sandpaper
Soft, lint-free cloth
Painter’s tape
Newspaper
High-quality paint brush

Remove any sanding dust using a clean rag. Ensure that the surface is clean, dull, and dry before painting or staining. Move the nightstand onto the covered surface and use painter’s tape and newspaper to protect the top of the nightstand and the door inset while you paint the rest of the nightstand.

Apply Minwax® Pre-Stain Wood Conditioner to only the door inset using a brush or clean cloth for the best, most even color. Allow the Pre-Stain Wood Conditioner to penetrate the wood for 5 to 15 minutes, then remove any excess with a clean, dry cloth.

Be prepared to apply Minwax® Oil Based Wood Finish in Classic Gray to the door inset within 2 hours of the Pre-Stain Wood Conditioner application. Test the Oil Based Wood Finish on a small portion of the door inset to ensure you are satisfied with the color. If you are satisfied with the color, stir the Oil Based Wood Finish well before applying. Apply the Oil Based Wood Finish to the door inset in the direction of the grain and allow to penetrate the wood for 5-15 minutes. The longer you wait, the darker/richer the color will be.

After the Oil Based Wood Finish has penetrated, wipe away the excess, working with the wood grain to blend lighter and darker areas together. When you are satisfied with the color, allow the Oil Based Wood Finish to dry completely for 24 hours before applying a protective topcoat.

Finish the door inset with a clear protective topcoat. To achieve this look, use Minwax® Polycrylic™ Protective Finish in Matte. Apply to the door inset with a high-quality synthetic brush in one direction with the grain. For best results use three coats, allowing each coat 2 hours to dry before using 220 grit sandpaper to lightly sand the door inset, ensuring an even finish for the next coat.

RELATED PROJECTS

Check out some similar projects.

FIND YOUR INSPIRATION

Search

Chalky Finish Antiqued Nightstand

Krylon Supplies You'll Need

Other Supplies You'll Need

Key Tip

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

Step 16

Step 17

RELATED PROJECTS

SIGN UP FOR EMAILS

Connect With Us