Metal Mailbox and Wood Post

by Krylon^®

Bring your mailbox to life by applying Krylon^® Fusion All-In-One^®.

1 hour

View additional outdoor spray paint projects from Krylon^®.

Remove mailbox from post.
MAILBOX:
- Wrap mailbox flag with painters tape to protect it from the paint.
- Using an all-purpose cleaner, thoroughly clean the mailbox to remove dirt, oils and dust. Rinse thoroughly with water and allow mailbox to dry.
- If paint or rust is flaking off the surface, use a wire brush or sandpaper to remove it. Wipe clean.
- Applying in a well-ventilated area, hold can of Krylon^® Fusion All-In-One^® in Gloss Hunter Green 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
- Allow paint to dry for 30-60 seconds.
- Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
- Make sure the mailbox is completely dry before you remove the painters tape from the flag.
POST:
- Wash the post with an all purpose cleaner to remove dirt and debris. Rinse thoroughly with water and allow to dry.
- Applying in a well-ventilated area, hold can of Krylon^® Fusion All-In-One^® in Gloss White 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
- Allow paint to dry for 30-60 seconds.
- Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Krylon^® Fusion All-In-One^® dries in 25 minutes or less, and can be handled in about one hour, although you may wish to wait a few hours before reattaching the mailbox to the post.