Carefully tape off the opening to the inside of the block and then spray the inside with Chalky – making sure to fully cover each side evenly by moving the can around to spray from different angles. Once dry, check for even and full coverage and repeat if necessary.
While that dries, cut out your stencil design and once you’re happy with the inside coating, adhere it to the front of the glass block. Then tape off the remainder of the front and it may be best to also tape off the sides as well to prevent any unwanted overspray.
Spray your stencil with Fusion All-In-One Red Pepper and allow to dry, apply a second coat if necessary. Once dry, peel off all the tape and the stencil.
Tie a bow around the block with the ribbon and you have just wrapped up a beautiful gift!