Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
Prep surface by sanding any rough areas, if necessary.
Wipe down surface to remove dust and particles on the surface.
Tape off legs of fire pit.
Apply even coats of Krylon® High Heat Flat Brown to shelf of fire pit in a side-to-side motion.
Recoat until area is completely covered.
Allow paint to dry completely.
Tape off shelf of fire pit.
Apply even coats of Krylon® High Heat Black to legs of fire pit.
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.