Krylon® Fusion All-In-One® Hammered Finish - Hammered Black will add a unique finish to your media/entertainment center.
Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
Using an all-purpose cleaner/degreaser, wipe down the entire media center to remove all dirt and grime. Rinse thoroughly with water and allow to dry.
If paint or rust is flaking off the surface, use a wire brush or sandpaper to remove it. Wipe clean.
Applying in a well-ventilated area, begin painting at the top of the media center, holding the can of Krylon® Fusion All-In-One® Hammered Finish – Hammered Black 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
Allow paint to dry for 30-60 seconds.
Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Work your way down sides, legs and bottom shelf, repeating steps 4, 5 and 6.
Krylon® Fusion All-In-One® dries in 8 minutes or less, and can be handled in less than one hour.
Get Inspired To Spray
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.