All paint should be used according to the manufacturer’s instructions.
Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
Using an all-purpose cleaner, thoroughly clean the table and chairs to remove dirt, oils and dust. Rinse thoroughly with water and allow to dry.
If there are any areas that are rusting, smooth them with sandpaper. Wipe clean.
Prime all planters using the Krylon® Rust Tough® Gray Primer, holding the can 6-8 inches from the surface and using a sweeping side-to-side motion with slight overlap.
Determine which planters you want to paint Sandstone and which ones you want to paint Limestone.
Starting with the Krylon® Rust Tough® Multicolor Textured Sandstone, hold the can 10-12 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
Allow paint to dry for 30-60 seconds.
Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Repeat this process on the planters you want to paint with the Limestone.
Krylon® Rust Tough® Multicolor Textured paint dries to the touch in 8 minutes and to handle in 30 minutes.
Allow to dry completely before planting.
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.