This fire pit refresher is on fire, thanks to Krylon® High Heat.
In a well-ventilated area, set up a spray paint area by covering workspace with a drop cloth.
Prep surface by sanding any rough areas, if necessary. Wipe down surface to remove dust and particles on the surface.
Shake can for 1 to 2 minutes before and during use. Spraying 10”-12” away from the surface, apply even coats of Krylon® High Heat® Satin Black to fire put in sweeping motion from side-to-side with slight overlap.
Apply multiple thin coats to avoid runs and drips in areas uncovered areas.
Dries to touch in 10 minutes or less. Handles after 1 hour. Recoat until the area is completely covered.
Allow paint to dry completely. Apply additional coats before 4 hours or after 7 days.
Get Inspired To Spray
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.