All paint should be used according to the manufacturer’s instructions.
In a well-ventilated space, cover a flat surface with a drop cloth or tarp and read the can and all directions.
If necessary, disassemble the light, and sand away any surface rust and scuff glossy ares for a smooth, consistent finish.
Make sure the surface should be clean, dull, and dry. Using painter's tape, cover any area(s) that you would not like to be sprayed.
Shake Krylon® Rust Tough Matte Black for 1-2 minutes. Hold can 8"-10" away from surface and begin spraying.
Spray in a sweeping motion with slight overlap. Apply those overlapping thin coats until surface is coated. Surface will be dry to touch in approximately 25 minutes.
When completely dry to the touch, carefully reassemble the light and once you have it re-installed where it goes, add in the bulb of your choice.
Step back and enjoy your refinished lights and updated space!
Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.