The time needed for preparation of the surface to be painted will depend on the actual state of the vehicle’s body. It is important to carefully mask windows and unremovable trimmings; that took me 3 hours. The primer coat itself should take 2 to 3 hours, and the painting took me about 4 hours.
If bodywork is needed, this might be a little more challenging than the painting itself. If in doubt, have it done by a professional or a friend with some experience in the matter, making sure the right primer will be used.
I think the best advice I could give you is simply doing a test on some object before starting your project. I used my canoe for practice and once I saw the result, it gave me all the confidence I needed to go ahead with my truck. I am certain you will get the same satisfaction of a job well done, and I have no doubt you will be very proud of your completed project.
Remove all side trims, which are held in place by double-faced tape, by using a small putty trowel to lift one end gently as you pull evenly (the trim will slowly come loose without breaking).
Remove bumpers and mask everything else that you do not want to paint.
Remove any rust and/or dirt from surface.
Lightly sand entire surface to ensure proper bonding of the paint.
Following manufacturer’s instructions, apply THIN coats of Krylon® COLORmaxx™ Gray Primer until it fully covers the surface.
Let primer completely dry and cure (at least 7 days).
If dust accumulates on surface while primer cures, wash surface and lightly sand surface once dry. Collect fresh plants and dead sticks.
Apply Krylon® Camouflage spray paint in the following order for best results: 1) Khaki 2) Olive 3) Brown 4) Black
Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.