If you are staining on top of a previously stained surface, make sure the stain will penetrate before using. To test, splash a couple drops of water on the surface. If the water penetrates, then so will the stain. If not, sand the entire wood surface by following these steps:
Lightly sand wood surface with the grain of the wood
Clean surface with a damp rag to remove any dust
Rinse the rag periodically to avoid dust build up
Stain the entire playset using thin, light coats of Krylon® Redwood Exterior Semi-Transparent Wood Spray Stain until surface is covered.
Wait 15 minutes between each coat of spray stain, if additional coats are desired.
Allow spray stain to dry 24-48 hours prior to using Backyard Playset.
Get Inspired To Spray
Wood and spray paint are a great combo. Go big and revive a piece of furniture. Go small and revamp a decorative box.