Krylon Supplies You'll Need

Gloss White
Gloss Banner Red

All paint should be used according to the manufacturer’s instructions.

WHERE TO BUY

Other Supplies You'll Need

2”×4” Wooden Boards
½” Plywood
Wood Screws
Glue
Carriage Bolt
Washer
Wing Nut
Wood Putty
Masking Tape
Circular Stencil
Screws

TOOLS

Miter Saw
Drill
Jigsaw
Measuring Tape
Cornhole/Compass Drill Bit

Place a leg in the corner with the rounded end flush against the back of the 2”×4”. Use the hole that was previously drilled in the leg as a guide. Place the bit through that hole and drill a new hole into the side of the 2”×4”.

Push a carriage bolt through the side board and leg. Use a washer and wing nut on the other side to secure the leg in place. Test to make sure the leg moves up and down, then sand excess wood off of the rounded side of the leg if it is not moving up and down easily.

WOOD INSPIRATION

Get Inspired To Spray

Wood and spray paint are a great combo. Go big and revive a piece of furniture. Go small and revamp a decorative box.

Search

Corn Hole

Krylon Supplies You'll Need

Other Supplies You'll Need

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

Step 16

Step 17

Step 18

Step 19

WOOD INSPIRATION

SIGN UP FOR EMAILS

Connect With Us