In a well-ventilated area, cover a flat surface with a drop cloth or tarp.
Step 2
Before starting, read the Krylon® labels for safety and application instructions.
Step 3
Tape over the trim and roof on the doghouse using painter's tape to avoid overspray.
Step 4
Place the doghouse on the covered surface and spray the walls using Krylon® Fusion All-In-One® in Satin Peacock Blue.
Step 5
Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap.
Step 6
Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 6 hours or after 24 hours.
Step 7
Allow the doghouse to fully dry after final coat.
Step 8
Remove the tape from the trim and roof.
Step 9
Cover the walls of the doghouse with painter’s tape, drop cloth or an old sheet to avoid overspray.
Step 10
Spray the trim and roof of the doghouse using Krylon® Fusion All-In-One® in Gloss Jungle Green.
Step 11
Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap.
Step 12
Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 6 hours or after 24 hours.
Step 13
Allow doghouse to fully dry after final coat.
Step 14
Your doghouse is now fade resistant, protected against rust and not to mention, safe and stylish for your pup!
WOOD INSPIRATION
Get Inspired To Spray
Wood and spray paint are a great combo. Go big and revive a piece of furniture. Go small and revamp a decorative box.
