Celebrate summer with this creative lattice flower wall using Krylon® Chalky Finish.
Prep spray painting area. It is recommended to spray either outside or in a well-ventilated area.
Cover surface area with a tarp or drop cloth.
Prepare lattice for spraying, ensuring that it is free of any dust or debris.
In a sweeping motion, apply three coats onto lattice with Krylon® COLORmaxx in Satin Meringue. Allow each coat to dry twenty minutes in between spraying.
Move at least 20 feet away from the lattice, and use drill to apply a single hole that is ¾ of an inch from the top rim.
Place pots upside down on the tarp. Spray pots with two coats of Krylon® COLORmaxx in Gloss Coral Isle, allowing twenty minutes between each coat.
After lattice is completed and dry, determine the placement of the pots on the lattice. Once placement has been determined, take a cup hook and manually screw it into the pot on the lattice you would like for the pot to hang. Tighten screws ending with the opening of the screw facing upward.
Get Inspired To Spray
Wood and spray paint are a great combo. Go big and revive a piece of furniture. Go small and revamp a decorative box.