Set up a spray paint area by covering your work space with a drop cloth. Make sure that the space is well-ventilated. Before beginning your project, read the Krylon® label for safety and application instructions, and follow them accordingly.
Step 2: Sand It Down.
Sand the table with the 100 grit sandpaper. For best results, sand in line with the wood's grain and keep strokes light and even.
Step 3: Clean It Up
Wipe the end table down with a damp rag to remove any dirt or dust.
Step 4: Shake.
Shake the can of Krylon® COLORmaxx Gloss Banner Red thoroughly, for at least two minutes.
Step 5: Spray.
Spray down the end table. For best results, apply light, even coats in a sweeping motion with slight overlap, starting and ending each spray stroke off the project.
Get Inspired To Spray
Wood and spray paint are a great combo. Go big and revive a piece of furniture. Go small and revamp a decorative box.