Croquet Set

by Krylon^®

Up your croquet game with this colorful set by Krylon^®.

3 hours

In a well-ventilated space, cover a flat surface with a drop cloth or tarp.
Before starting, read the Krylon^® labels for safety, application, and dry time instructions.
In a separate area from where you will paint, ensure the surface of the croquet mallets and balls are clean, dull, and dry. Use medium grit sandpaper to remove any uneven surface if necessary and then wipe clean of any debris.

Use painter's tape to cover the very top and very bottom of the mallet. In addition, tape off two stripes, one on each end of the head.
Paint the exposed area of the mallets using Chalky Finish Paint in Anvil Gray, Bonnet Pink, Tidal Blue, Scarlet and Classic White..
Once the mallet is dry to the touch, remove the painter's tape.
Once the mallet is fully dry, tape around the bare spots previously covered with painter's tape to avoid overspray.
Spray the spots that were previously covered with painters tape with Chalky Finish Paint in Classic White.
Once the newly sprayed portion is dry to the touch, remove the tape from the surrounding areas.
Wait for the mallet to dry completely.

To create a look similar to the mallets, use a strip of painter's tape to tape off the middle portion of the balls.
Paint the exposed area of the balls using Chalky Finish Paint in Bonnet Pink, Tidal Blue, Scarlet and Classic White.
Once the balls are dry to the touch, remove the painter's tape.
Once the balls are fully dry, tape around the bare spots previously covered by painter's tape to avoid overspray.
Spray the spots that were previously covered with painter's tape with Chalky Finish Paint in Classic White.
Once the newly sprayed portion is dry to the touch, remove the tape from the surrounding areas.
Wait for the balls to dry completely.