DIY Mini Goalpost

Krylon Supplies You'll Need

Gloss Sunbeam
Satin Spring Grass

All paint should be used according to the manufacturer’s instructions.

Other Supplies You'll Need

One inch diameter PVC pipe cut into the following lengths:
- 12 inches x 2
- 6 inches x 5
- 3 inches x 3
One inch diameter PVC connectors:
- Caps x4
- Elbows x 5
- Tee’s x2

Assemble goal post by first attaching caps to one end of each 12” piece. Then attach an elbow to the other end of each 12” piece. A 6” piece goes into the other end of each of those elbows and connect the two pieces with a tee shaped piece. Through the stem of the tee, insert a 3” piece, then attach an elbow to that. *Note the stem of the tee should be facing backwards, not down.

Attach the stem of a tee to the 6” piece of the upright. Insert a 3” piece to either side of the tee, then an elbow to each of those. Insert the last 6” pieces into the elbows and cap them off with remaining caps. *You will be spraying the base and the upright parts separately, but it helps to assemble the whole thing first to get everything oriented in the right direction.

For spraying, remove the base of the goal post and spray with Fusion Satin Spring Grass. Spray the upright Fusion Gloss Sunbeam. We recommend two coats for both sprays. *Make sure to spray into the crevices where the connectors and PVC pipes meet.

PLASTIC PROJECTS

Get inspired to spray

Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.

Search

Krylon Supplies You'll Need

Other Supplies You'll Need

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

PLASTIC PROJECTS

SIGN UP FOR EMAILS

Connect With Us