Rust Protector™ Hammered Finish -

Rust Protector™ Hammered Finish

Rust Protector™ Hammered Finish creates a "hand-hammered", rust-fighting finish in one easy step.

Dries in 8 minutes or less
Superior corrosion protection
Direct to metal

Dry to touch:

8 minutes or less

Dry to handle:

30 minutes

For use on

Metal, Wood, Masonry, Concrete, Wicker, Ceramic, Glass, Plaster

Product Information

The colors that appear on the screen and in print may not match actual applied color.

Dry to touch:

8 minutes or less

Dry to handle:

30 minutes

Net Weight:

12 oz.

Recoat Window:

Within 2 hours or after 48 hours

Coverage:

Up to 20 square feet

Application Conditions:

40 to 80 degrees; low humidity

Clean up:

Lacquer thinner

Rust Protector™ Hammered Finish is rated 3.0 out of 5 by 2.

Rated 5 out of 5 by Gardomlakekid from Very satisfied in british columbia Prepped my dads rav 4 steel factory rims by wirewheel and sanding lightly with 120 grit , cleaned w laquer thinner , blow w air , mask , warm up rims wth heat gun slightly for extra adhesion ( rubber still attached ) paint one decent base /flood coat rewarm with heat gun amazing orange peel hammered appearance and am pretty sure that paint is on there for a long time , thx again

Date published: 2019-11-19

Rated 1 out of 5 by Daryl56 from Charcoal gray hammered Not to impressed, bought a box of 6 cans. First can never able to get a hammered finish from it, second can worked better, but just as I got the hammered finish I was looking for the nozzle strted spitting globs of paint out of nozzle all over the wet surface. Now waiting for a week to past and paint to dry completely so I can wet sand globs out and try coating again to achieve a good hammered finish. Not going to hold my breath on being able to finish all my pieces without more disaster from the spray nozzles, 2 out of 6 cans purchased have failed miserably!

Date published: 2018-05-24