-
In a well-ventilated space, cover a flat surface with a drop cloth or tarp.
-
Before starting, read the Krylon® and Minwax® labels for safety, application, and dry-time instructions.
-
In an area separate from where you will stain and paint, use 220 grit sandpaper to sand the shelves in the direction of the wood grain.
-
Wipe the shelves with a clean cloth to remove any sanding dust.
-
Apply Minwax® Pre-Stain Wood Conditioner using a brush or cloth for the best and most even color.
-
Allow the Pre-Stain Wood Conditioner to penetrate the wood for 5 to 15 minutes, then remove any excess with a clean, dry cloth.
-
Be prepared to apply Minwax® Wood Finish Oil-Based Stain in Natural within two hours of the Pre-Stain application.
-
Test the Minwax Wood Finish Oil-Based Stain on a small, hidden portion of the shelves to ensure you are satisfied with the color.
-
If you are satisfied with the color, stir the Minwax Wood Finish Oil-Based Stain well before applying. Apply the Minwax Wood Finish Oil-Based Stain in the direction of the wood grain and allow to penetrate the wood for 5-15 minutes. The longer you wait, the darker/richer the color will be.
-
After the Minwax Wood Finish Oil-Based Stain has penetrated, wipe away the excess working with the wood grain to blend lighter and darker areas together. When you are satisfied with the color, allow the Minwax Wood Finish Oil-Based Stain to dry completely.
-
When the Minwax Wood Finish Oil-Based Stain has fully dried, use painter’s tape to divide each shelf into different sized sections. To achieve the pictured look, cover the right third of the upper shelf, left half of the middle shelf, and two sections of the lower shelf with newspaper to protect the new wood finish.
-
In a separate area from where you will paint, use sandpaper to lightly sand the exposed portions of each shelf and wipe clean with a cloth. Ensure that the surface is smooth, dull, and dry before applying paint.
-
Return the shelves to the drop cloth or tarp. Using a high-quality brush, apply Krylon Brilliant Metallic Brush-On in Gold Leaf to the portions of the shelves that you just sanded.
-
When the Brilliant Metallic Brush-On is dry to the touch, remove the painter’s tape and newspaper to prevent any peeling or chipping. Allow the Brilliant Metallic Brush-On to dry completely before moving on to the next step.
-
Finish the shelves with a clear protective topcoat. To achieve this look, use Minwax® Polycrylic™ Protective Finish in Matte. Apply to the entire surface of the shelves with a high-quality synthetic brush in one direction with the grain. For best results use three coats, allowing each coat 2 hours to dry before using 220 grit sandpaper to ensure an even finish for the next coat.
-
After applying the final coat of Polycrylic Protective Finish, allow 24 hours for the finish to dry completely.
-
When fully dry, mount the shelves on your wall.
-
Fill the shelves with a selection of colorful items and enjoy the pop of on-trend metallic in your room of choice!