Wooden Bean Bag Toss Boards

by Krylon^®

Add Krylon^® Glowz^® to your boards to keep playing long after the sun goes down.

2 hours

View additional outdoor spray paint projects from Krylon^®.

Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
Prep surface by sanding any rough areas. Wipe off surface to remove excess sawdust.
Applying in a well-ventilated area, hold can of Krylon^® ColorMaster^™ Primer 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
Allow primer to dry for 30-60 seconds.
Hold can of Krylon^® ColorMaster^™ Paint + Primer Gloss White 6-8 inches from the surface and add border wherever using Glowz - around edge and center hole. Let dry.
Hold can of Krylon^® Glowz^® 6-8 inches from the surface and paint edge/around center hole. Let dry and tape off Glowz^®-painted area.
Hold can of Krylon^® ColorMaster^™ Paint + Primer Gloss Black 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.
Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.
Remove tape to reveal Glowz^® edge and center border.
Krylon^® ColorMaster^™dries in 10 minutes or less, and can be handled in about one hour, although you may wish to wait overnight before playing on your newly painted boards.