-
Apply a light coat of ColorMaster™Gloss White Paint to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Diamond Dust to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Use the 1 ½” wide blue painter's tape to mask off stripes on the vase
-
Keep the stripes evenly spaced and match up tape at ends for a smooth line
-
Apply a light coat of ColorMaster™Gloss Cherry Red Paint to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Cherry Bomb to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Remove tape
-
Apply a light coat of ColorMaster™Gloss White Paint to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Diamond Dust to the vase, repeat until vase is completely covered, allowing time to dry in between coats
-
Go online to look for a star shape that you would like to use
-
Use a photo editing program to change the size of the star, if needed
-
Make sure it is no larger than 2” wide
-
Print the star shape onto cardstock and cut out to use as a template
-
Rip off a piece of 2” wide blue painter's tape that is big enough to fit the star template
-
Stick the star template lightly to the sticky side of the tape
-
Use sharp scissors to cut out the shape from the tape
-
Gently peel the cardstock star template from the tape
-
Firmly press the tape star onto the vase
-
Repeat step 4 until you have a star pattern that you like around the vase
-
Apply a light coat of ColorMaster™Gloss Regal Blue Paint to the vase
-
Repeat until vase is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Twilight Sky to the vase. Repeat until vase is completely covered, allowing time to dry in between coats
-
Remove tape
-
Cover the clay pot with a light coat of ColorMaster™White Primer, repeat until pot is completely covered, allowing time to dry between coats
-
Apply a light coat of ColorMaster™Gloss White Paint to the pot, repeat until pot is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Diamond Dust to the pot, repeat until pot is completely covered, allowing time to dry in between coats.
-
Use a photo editing program to change the size of the star, if needed
-
Use the 1 ½” wide painter's tape to carefully mask off the rim of the pot
-
Cover the hole on the bottom on the inside of the pot with a piece of tape
-
Turn the pot upside down
-
Apply a light coat of ColorMaster™Gloss Cherry Red Paint to the pot, repeat until pot is completely covered, allowing time to dry in between coats
-
Apply a light coat of Glitter Blast™ Cherry Bomb to the pot, repeat until pot is completely covered, allowing time to dry in between coats
-
Remove tape